Understanding duplex and speed terminology - Cisco Learning …
I just completed the INCD1 and 2 class and really need some help as to the best way to study and prepare for the test. Any advice will do I have Wendell Odem's book and Cisco packet tracer. …
No gigabit speed between switch and router - Cisco Learning …
As usual, the show output on the router's gig/01 interface shows 100Mb/s while the interface on the switch (gig0/1) shows 1000Mb/s. It doesn't matter if I set it manually or use …
gigabitethernet0/0 is up while the line protocol is down (disabled)
I am using Cisco packet tracer.I connected two routers using a crossover cable.My interface gigabitethernet0/0 is up while the line protocol is down (disabled) .
Difference between Bandwidth command and Speed command
The speed command is the rate at which the information is sent from one end of the link to the other end ie; 10Gig, 1Gig, 100Mb, 10Mb. These are hard coded and cannot be specified to the …
how to verify Ethernet interface speed/duplex auto settings on a …
Hey Devon, You can use the show interface [intf-type slot/sub-slot] command, for instance; R3#show interface FastEthernet0/0 | inc duplex Full-duplex, 100Mb/s, 100BaseTX/FX You …
Speed Interface Trunk 2960 Switch Change from 1000Mb/s to …
The fact is that suddenly the value changed from 1000Mb/s to 100Mb/s, when both interfaces were in auto So now with both interfaces forced to be in speed 1000, the Trunk is working well …
Connect SFP multimode 100Mb to a 1000MB SFP on switch
I want to know if I can connect a server with a 100Mb fibre multimode interface to a 1000Mb SFP (GLC-SX-MMD) on a Cisco 3850 (WS-C3850-24S-E). Is any problem with the speed …
Interface 'DLY': How it is calculated / varies? - Cisco Learning …
Full-duplex, 100Mb/s, 100BaseTX/FX FastEthernet2/0 is administratively down, line protocol is down MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, Full-duplex, 100Mb/s, 100BaseTX/FX …
Mismatched duplex setting - Cisco Learning Network
Ethernet MTU 9214 bytes, BW 100000 kbit Full-duplex,100Mb/s,auto negotiation: off, uni-link: n/a Up9 hours,31 minutes,37 seconds LoopbackMode:None 468 link status changes since last …
Link between two Gigabit Ports operating at 100mb
Hello Guys. I have two Cisco C2960-24TT-L with two gigabit ports connected using CAT6 UTP cable to a Cisco C2960-24TC-S also with two gigabit ports. Gig0/1 connects to Gig01 and …